Specially designed for screen printing on flat glass, such as automobile windshields, appliances, decorative glass for architecture, and more. Also suitable for printing on other rigid materials.
Centering Conveyor, Screen Printer, and Outlet Conveyor fully integrated into a single system. Each of the three units has an independent conveyor, interconnected electrical controls, and synchronous leveling orientation of substrate to achieve fully automatic in-line processing.
Automatic registration pins on inlet conveyor platform and printing table can perform precise alignment.
Erected bridge at inlet entrance of conveyor belts system, enable to uplift pneumatically for operator convenience to close machine adjustment and cleaning.
Printing table provides air blow and suction, separate three zones switch and automatically switch on / off depending upon printing stroke to assist glass registration.
Unique special roller to carry glass movement without scratching.
Emergency stop button / safety protective barrier / procedural chain-locking control for thorough protection.
|Specification||Metric Units||Unit Conversions|
|Maximum printing area||1200mm x 2500mm||47⅝" X 98¾"|
|Minimum printing area||700mm x 1000mm||28" x 39"|
|Max O/D frame size (DxW)||1750mm x 3200mm||68⅞" X 125¾"|
|Screen frame height||26mm to 54mm||1.02" to 2.12"|
|Screen X/Y adjustment||±10mm / ±10mm||± ⅜" / ± ⅜"|
|Glass thickness||3mm to 25mm||0.118" - 0.98"|
|Electrical power source||3-phase, 220/380V, 50/60Hz||3-phase, 220/380V, 50/60Hz|
|Compressed air source||5-7kg/cm²||71-100psi|