ATMAOE 56 / 67 / 710 OPTO-electronic High Precision Four-Post Screen Printer (G7 version)

ATMAOE 56 / 67 / 710
Optoelectronic High Precision Four-Post Screen Printer
(G7 version)

Suitable for High Precision Automatic Screen Printing. Applications include Membrane Switch/Overlays, Electroluminescent Panel, Light Guide Panel, Diffusion Panel, Touch Screen, Flexible Printed Circuit, Ball Grid Array, Flip-Chip Array, Cell Phone Cover Lens, Laptop Display Glass and much more.


Semi-automatic operation with sliding table for manual substrate load/unload. See below for options including Gripper Take-Off System, CCD Surveillance System for substrate and/or screen alignment and much more.

Ergonomic design optimized for ease of use with open access for accurate substrate registration, efficient off-loading, and easy screen cleaning. All setup controls are within close reach of the operator.

Horizontal head lift keeps screen parallel with printing table for even ink flow.

Front frame loading for fast setup.

Specification ATMAOE 56 Metric Units ATMAOE 56 Unit Conversions ATMAOE 67 Metric Units ATMAOE 67 Unit Conversions ATMAOE 710 Metric Units ATMAOE 710 Unit Conversions
Table Size (DxW) 680mm x 700mm 26¾" x 27½" 800mm x 800mm 31½" x 31½" 950mm x 1250mm 37⅜" x 49¼"
Table Height 970mm+30mm 38⅛"+1⅛" 970mm+30mm 38⅛"+1⅛" 970mm+30mm 38⅛"+1⅛"
Vacuum Area (Standard) 420mm x 500mm 16½" x 19⅝" 600mm x 660mm 23⅝" x 26" 700mm x 800mm 27½" x 31½"
Vacuum Area (Max) 500mm x 600mm 19⅝" x 23⅝" 600mm x 740mm 23⅝" x 29⅛" 760mm 1060mm 30" x 41¾"
Maximum Print Area (Standard) 420mm x 500mm 16½" x 19⅝" 600mm x 660mm 23⅝" x 26" 700mm x 800mm 27½" x 31½"
Maximum Print Area (Max) 500mm x 600mm 19⅝" x 23⅝" 600mm x 750mm 23⅝" x 29½" 750mm x 1050mm 29½" x 41⅜"
Minimum Print Area 250mm x 250mm 9⅞" x 9⅞" 300mm x 300mm 11¾" x 11¾" 300mm x 300mm 11¾" x 11¾"
Table Speed 1000mm/sec 39"/sec 1150mm/sec 45"/sec 1150mm/sec 45"/sec
Screen X/Y Adjustment ±10/±10mm ±⅜"/±⅜" ±10/±10mm ±⅜"/±⅜" ±10/±10mm ±⅜"/±⅜"
Substrate Thickness 0.1mm - 30mm 0.0039" - 1⅛" 0.1mm - 30mm 0.0039" - 1⅛" 0.1mm - 30mm 0.0039" - 1⅛"
Maximum O/D Frame Size 950mm x 950mm 37⅜" x 37⅜" 1100mm x 1100mm 43¼" x 43¼" 1200mm x 1400mm 47¼" x 55⅛"
Minimum O/D Frame Size 800mm x 800mm 31½" x 31½" 900mm x 900mm 35⅜" x 35⅜" 1000mm x 1200mm 39⅜" x 47¼"
Screen frame height
(other heights available)
25mm to 45mm 1" to 1¾" 25mm to 45mm 1" to 1¾" 25mm to 45mm 1" to 1¾"
Screen Height at Clean-up Lift Level 285mm 11¼" 350mm 13¾" 350mm 13¾"
Peel-off Stroke 0-20mm 0-¾" 0-25mm 0-1" 0-30mm 0-1⅛"
Print Pressure 3 - 62 kg 6.6 - 136 lb 3 - 62 kg 6.6 - 136 lb 3 - 62 kg 6.6 - 136 lb
Squeegee Inclination Angle 20° ±5° 20° ±5° 20° ±5° 20° ±5° 20° ±5° 20° ±5°
Print Head Speed 20mm - 625mm/sec ¾" - 24"/sec 20mm - 625mm/sec ¾" - 24"/sec 20mm - 625mm/sec ¾" - 24"/sec
Printing-head Skew Angle ±5° ±5° ±5° ±5° ±3° ±3°
Maximum Capacity
(P/H non-stop full stroke)
600 600 570 570 480 480
Power Consumption (kW) 2.93 kW 2.93 kW 3.25 kW 3.25 kW 3.35 kW 3.35 kW
Power Source 3-phase, 220/380V, 50/60Hz 3-phase, 220/380V, 50/60Hz 3-phase, 220/380V, 50/60Hz 3-phase, 220/380V, 50/60Hz 3-phase, 220/380V, 50/60Hz 3-phase, 220/380V, 50/60Hz
Air Pressure 5-7kg/cm² 71-100psi 5-7kg/cm² 71-100psi 5-7kg/cm² 71-100psi
Air Consumption 5 L/cycle 1.38 Gal/cycle 5 L/cycle 1.38 Gal/cycle 5.3 L/cycle 1.47 Gal/cycle
Dimensions (WxDxH) 150cm x 210cm x 145cm 59" x 83" x 57" 156cm x 240cm x 145cm 62" x 95" x 57" 200cm x 270cm x 145cm 79" x 106" x 57"
Weight 1000 kg 2005 lbs 1120 kg 2470 lbs 1155 kg 2547 lbs

Features and Benefits:

A. HMI color touch panel with 7” screen streamlines setup and provides consistent control over print quality for repeat jobs by saving and restoring up to 100 sets of stored functions and parameters.


B. New high rigidity frame designed for highest torsional strength keeps machine vibration free at all speeds and suitable for CCD Surveillance System.

C. Print table top is high strength aluminum alloy with honeycomb interior structure precision CNC machined for extreme accuracy. Includes custom vacuum hole size 1.0 mm with a pitch of 14x14mm and a center hole in-between four holes to ensure that substrate has higher surface contact with print table throughout printing cycle, ideal for thin films / substrates.

D. Heat dissipating turbine vacuum offers powerful suction and blowback. Vacuum and blowback micrometers are independently controlled and numbered for repeatability. Blowback function allows substrate lift when gripper holds the leading edge of substrate to avoid scratching when print table returns to operator.

E. German SEW-Eurodrive motor powers four-post head lift on linear bearings and guide rails. Includes synchronized transmission shaft, double chain, encoders and photo sensors to control screen up / down position.

F. Gripper Take-off optional.

G. Digitally controlled servo peel-off distance start/end point can be set relative to image size, with variable speed and height control. Peel-off and print stroke is synchronized with all conveniently adjustable preset functions. Parameter settings, including off-contact, can be saved and recalled from touch-screen.

H. Printing and flood coater stroke parameter settings can be saved and recalled from touch-screen. Servo motor drive for stable low speed to high speed control, with linear guide rails and cog toothed belt for smooth precise vibration free printing, ensures absolutely even and uniform ink deposit.


I. Utilizes special ball bearing micrometer design instead of thread bolt type adjustment. This is designed to prevent stripping out and offers play-free registration without backlash during setup.

J. Print table X / Y movements adjusted via precision scaled micrometer controls for fine registration with numbered value for repeatability and standardization.

K. Print table motion cycle driven by top-class servo motor, using swivel arm system guided by linear rail for consistent repeatability.

L. Pneumatic frame locking system with check valves / airlock and four-sided frame holding assembly ensures rigidity and high stability.

M. Digital pressure equalization system allows parameter settings to be saved and recalled from touch-screen. Print and flood coater pressure is digitally settable and automatically equalized for precise balance and consistency of printed ink film layer. Includes numbered fine-tuning depth, skew-angle (snowplow) and swivel-angle of squeegee and flood coater.

N. No-peel flood coater function has digital settings that can be saved, recalled, and adjusted from the touch-screen.

O. Squeegee / flood high-park capability facilitates faster setup and changeover.

P. Choice of flooding before the print stroke, flooding after the print stroke, or higher cycle speed-flood while screen lifts to full up position. Digital settings can be saved, recalled, and adjusted from the touch-screen.

Q. Digital setting for the number of print cycles necessary for printing job and the machine will stop running automatically upon completion of set amount. Can be set, saved, and adjusted from the touch-screen.


R. Screen frame holder is equipped with rear registration pin system for fast and repeatable frame position centering to reduce setup time.

S. Rail-led cylinders guide squeegee and flood coater up and down, allowing smooth movement and unrestricted accurate pressure application to improve print quality.

T. Touch-screen digital settings can be set for light squeegee pressure at the beginning of the print stroke and then once past the edge of substrate regular full pressure can be applied according to the input setting. This feature prevents squeegee rubber from ripping screen against direct contact of sharp edge or corner of rigid substrate. Allows longer life of mesh and squeegee rubber.

U. Screen cleaning safety switch located at the rear of the machine completely disables any start function to protect operator when cleaning the screen. Operator can completely lock out the machine to prevent any chance of machine activation.

V. Print head safety guards on left and right side of print head. If activated, machine stops immediately and print head slowly lifts to full upright position.


W. Squeegee and flood coater depth, inclination, and bias angle are finely adjustable using a sophisticated micrometer, in order to minimize chatter and vibration from irregular print surface heights and traces.

X. Four corner screen leveling of frame holder allows fine adjustment to compensate for mesh tension or uneven frames, and to always position mesh parallel with the table surface.

Y. Unique four-post locking system ensures that no lifting of print assembly or corner post can occur, while keeping perfectly parallel to the print table at all times during the printing sequence. This function allows controlled, consistent ink deposit even if excessive squeegee pressure is applied.

Z. FRL triad assembly is equipped with an automatic pressure detection switch that stops the machine when low air pressure detected. The control system for compressed air supply is an oil free FRL unit to prevent oil mist pollution, particularly applicable in clean room environments.

AA. Two safety bars are located in front of the sliding table, and bilateral safety bars are located along left and right side of four-post printing head. The safety bars stop the machine immediately when activated. An error message will be displayed and restart icon will appear on the touch screen. Once restored or reset properly the table or printing-head will return back to home position. Additional safety features include cycle start/interruption control on the foot switch, emergency stop button, safety reset key, automatic error diagnostic system on touch screen and power surge protection. Meets and exceeds all European and US Safety requirements.


Options:
▶CCD Surveillance System for screen registration
▶CCD Surveillance for substrate registration
▶Dripless squeegee system (rotary type)
▶Cleaning roller system
▶Anti-static bar
▶Registration pins
▶Optic sensors for substrate alignment
▶Custom vacuum hole size
▶Gripper Take-off system with up/down conveyor lower with air-blast system ideal for thin substrates


...

www.ATMAEquipment.com

www.RHSolutionsLLC.com

sales@rhsolutionsllc.com

ph.513-407-5399

821G U.S. 50

Milford, OH 45150


RH Solutions LLC represents manufacturers who are dedicated to continuous improvement of their products
and thus reserves the right to change specifications without prior notice.

Copyright © RH Solutions LLC 2015-2017